Specifications:
- Automatic or Electronic Manual Control option
- 220 litre plastic tank
- 3 x 12 volt Pumping System for automatic applicators, no tip changes required
- Star-Wheel Moisture Metering system on all automatic applicators
- Proximity Speed Sensors on all automatic applicators
- 474A Crop-Eyes standard on all automatic Large Square Applicators. Auto On/Off when no crop over pickup of baler.
- Touch Screen in-cab Control Box, see Control Page
- Calibration of Automatic Applicators is carried out by programming length and weight of bale, the applicator matches litres per tonne to moisture and bale speed changes, and will apply within 0.1 litre per tonne
- 300 Job Record Store, will record not only field record, but all individual bale records, which is down loadable onto an Excel Spreadsheet. (Recorded is: Bale Identification Number/Field Name/Litres Applied/Individual Bale Weight or Total Tonnes Baled/Average Moisture/Highest Moisture/ If add the optional GPS Yield Mapping will record Latitude & Longitude
- Tagger optional: Will individually tag every bale and send all data as above to the tag through a radio frequency and with our reader that is either hand held or loader mounted will record and identify all the bale information, see Tagger Page
- From Autumn 2010 all Case, New Holland & Massey Ferguson Balers will interface with our Automatic Applicators and information can be on the baler monitor screen (must be large screen) and if the baler as a bale weigher this information will also interface into our unit recording bale wights as you bale and recording onto the tags, if you opt for a Tagger
- 1 x 12 volt pumping system for electronic applicators
- All plumbing and wiring supplied
Click here to view Automatic or Electronic Manual Control for this Applicator:
Please Note due to the higher output capacity and the accuracy of the Automatic Applicators we would not recommend the Electronic Manual Applicators for any Large Square Baler
Models Automatic applicator installs on:
New Holland Standard BB920 / BB9040 – Auto App. No: 5554520B
Claas 1100 / 1150 – Auto App. No: 5554520B
Hesston 4600 – Auto App. No: 5554520B
Models Electronic Manual applicator installs on:
New Holland Standard BB920 / BB9040 – Manual App. No: 4484520
Claas 1100 / 1150 – Manual App. No: 4484520
Hesston 4600 – Manual App. No: 4484520
2010 Selection Guide
| Accessories | Shipping | |
| Weight | ||
| Individual Bale Identification System | ||
| 850 | Chamber-Mounted Tagging Device, the “Tagger” | 150 |
| 851 | 1 Roll of RFID Tags for Tagger. Quantity 850 Tags per Roll | 4 |
| 853 | 3 Rolls of RFID Tags for Tagger. Quantity 2,550 Tags per Roll | 8 |
| 856 | 6 Rolls of RFID Tags for Tagger. Quantity 5,100 Tags per Roll | 12 |
| 860 | RFID Bale Tag Reader | 14 |
| Accessories | ||
| 453 | Digital Electronic Flow Meter | 8 |
| 87298959 | Service Pack for Small Square Balers with Automatic System | 3 |
| 87298958 | Service Pack for Round Balers with Automatic System | 3 |
| 87298957 | Service Pack for Large Square Balers with Automatic System | 3 |
| 469 | Pumping Kit for New Holland FR Choppers | 26 |
| 474A | Hay Indicator Kit for 2005 and Newer Automatic & Electronic Control | 5 |
| 475 | Floor Mounted Applicator Pause Switch 2005 and newer | 5 |
| 476 | Moisture Monitor for Self-Propelled Forage Harvesters | 5 |
| 500 | Moisture Only for CNH Large Square Balers | 48 |
| 500A | Moisture Only for AGCO Large Square Balers | 48 |
| 500K | Moisture Only for Krone Large Square Balers | 48 |
| 566 | Conversion Kit – 465 to a 565 | 28 |
| 9212 | 12 Volt Electric Transfer Pump (4 gallons per minute) | 24 |
| 9213 | Hand Transfer Pump | 3 |
| 9214 | 12 Volt High Output Electric Transfer pump (15 gallon per minute) | 38 |
| F2000 | Delmhorst Hand-Held Kit – Digital with Windrow Tester & 10″ Probe | 3 |
| FX2000 | Delmhorst Combination Hand-Held & In-Chamber Tester | 6 |
