Specifications:
- Automatic or Electronic Manual Control option
- Automatic Control Applicator for Variable Chamber Balers Only:
- Not Suitable for Fixed Chamber Balers use Electronic Manual Kit
- 220 litre plastic tank
- 3 x 12 volt Pumping System for automatic applicators, no tip changes required
- Round Disc Moisture Sensing system on all automatic applicators (Measure through bale from one side of bale chamber to the other side, moisture accuracy within 1 percentage point.
- 474A Crop-Eyes standard on all automatic Round Baler Automatic Applicators. Auto On/Off when no crop over pickup of baler.
- Touch Screen In-cab Control Box, see Control Page
- Spray Shield designed for your particular baler model with a five tip system
- Calibration of Automatic Applicators is carried out by programming seconds to form a bale & bale weight, the applicator matches litres per tonne to moisture and baling speed, and will apply within 0.1 litre per tonne of accuracy
- 63 Job Record Store, will record all field date as listed: Total Litres Applied/Average Moisture/Highest Moisture
- All plumbing and wiring supplied
- Diagnostics check - Runs pumps to check pump outputs
- Electronic Manual Applicatorsfor Variable & Fixed Chamber Round Balers
- Electronic Variable Cab Mounted Control Box see Control Page
- 220 litre plastic tank
- 1 x 12 volt pumping system for Electronic Manual Applicators
- 3 sets of tips supplied to give a wide range of baling speed and moisture range from 16% to 30%. 3 tips within each set. Centre tip higher rate tip & wider angle to ensure centre of bale is securely treated and even treatment throughout the bale
- All plumbing and wiring supplied
- Electronic Manual Applicators will require either a Delmhorst F2000 Hand-held Moisture Meter or a Delmhorst FX2000 Combination Hand-held & In-Chamber Moisture Meter
- 474A Crop-Eyes Optional
Click here to view Automatic or Electronic Manual Control for this Applicator:
Models Automatic Applicator installs on:
Case 454 / 464 Variable Chamber – Auto App. No: 447-55
All previous model without the flat front use model 4464486B
Models Electronic Manual Applicator installs on:
Case RB454 / RB464 Variable Chamber – Manual App. No: 442-55
Case RB344 Fixed Chamber – Manual App. No: 442-55
All previous model without the flat front use model 4414486
2010 Selection Guide
| Accessories | Shipping | |
| Weight | ||
| Individual Bale Identification System (Large Square Balers Only) | ||
| 850 | Chamber-Mounted Tagging Device, the “Tagger” | 150 |
| 851 | 1 Roll of RFID Tags for Tagger. Quantity 850 Tags per Roll | 4 |
| 853 | 3 Rolls of RFID Tags for Tagger. Quantity 2,550 Tags per Roll | 8 |
| 856 | 6 Rolls of RFID Tags for Tagger. Quantity 5,100 Tags per Roll | 12 |
| 860 | RFID Bale Tag Reader | 14 |
| Accessories | ||
| 453 | Digital Electronic Flow Meter | 8 |
| 87298959 | Service Pack for Small Square Balers with Automatic System | 3 |
| 87298958 | Service Pack for Round Balers with Automatic System | 3 |
| 87298957 | Service Pack for Large Square Balers with Automatic System | 3 |
| 469 | Pumping Kit for New Holland FR Choppers | 26 |
| 474A | Hay Indicator Kit for 2005 and Newer Automatic & Electronic Control | 5 |
| 475 | Floor Mounted Applicator Pause Switch 2005 and newer | 5 |
| 476 | Moisture Monitor for Self-Propelled Forage Harvesters | 5 |
| 500 | Moisture Only for CNH Large Square Balers | 48 |
| 500A | Moisture Only for AGCO Large Square Balers | 48 |
| 500K | Moisture Only for Krone Large Square Balers | 48 |
| 566 | Conversion Kit – 465 to a 565 | 28 |
| 9212 | 12 Volt Electric Transfer Pump (4 gallons per minute) | 24 |
| 9213 | Hand Transfer Pump | 3 |
| 9214 | 12 Volt High Output Electric Transfer pump (15 gallon per minute) | 38 |
| F2000 | Delmhorst Hand-Held Kit – Digital with Windrow Tester & 10″ Probe | 3 |
| FX2000 | Delmhorst Combination Hand-Held & In-Chamber Tester | 6 |
